How to Connect a LED Light to a Battery and Switch?

Whenever it is about the LED lights, we recommend you to get them. These are more money-saving than the other lights available in the market. Along with this, you will get durability when it comes to these lights. Even some of these lights will last more or less 25 years. Once you install these, half of your life is worry-free!

The LED lights of these days are constructed in a manner that you can run them with a 12v battery. In terms of protection, we recommend you run the LED lights through a relay.

Here, we will tell you how to connect a LED light to a battery and switch in six easy steps! All you need to do is follow the phases carefully and you will be ready!

Step by Step Process of Connecting LED Light to Battery and Switch

Even if you don’t have a LED light, you can learn how to convert 4ft Fluorescent light to LED and then connect it to the battery and switch! Let’s check the easy steps on how to light a bulb with a battery and wire and switch! It’s easy as pie!

Step 1: Gathering the Gears

The first step when it comes to LED light connected to a battery, we talk about the gears you need. So, get your hands on the LED light first.  Make sure you get the best LED wafer lights for better lighting! However, the color of the LED is a matter to think here too. So, what LED light color is better for studying and which one for decoration? Read and learn about it first.

With the light, you will need a switch along with a resistor. For the proper connection, you will need copper wire too. Solder and soldering iron are some basic requirements of the process. And finally, you cannot complete the process without a 12-volt power source. So, get the gears ready and start working on the connection!

Step 2: Deciding the Placement

Now that you are ready with the necessary equipment, you have to decide where you have to pull it. Yes, we know it’s tough to get this for you. And so, we will explain elaborately. Your job here is to understand where the battery and the LED light will go.

If you plan to add the lights to the high wall, you have to create a support system for the batteries so that it doesn’t fall. If you are installing the lights close to the battery supply of 12v, you have to get support for it.

In this case, a box or any other supper like a ledge will work for you. You cannot just leave the battery there dangling! If you try to do so, the connections will break and will damage the wires along with the LED lights.

Step 3: Measuring the Distance

Get the LED lights and decide the placement of the light. Now, choose another place so that you can keep the battery there. You have to make sure that the place is close to the LED light you are installing. You have to get the On/Off switch too and place it here.

It is time for the measurement. The placement of the lights and the placement of the battery have a specific distance. You have to measure it first. With this length, you will understand how much wire you will need for this battery to work. If you are working witht he extension cords here, you must learn how to hide extension cords on carpet.

Step 4: The Checking

When you are done measuring the wire’s length, you have to check the batteries. Along with the batteries, check the switches too. There can be faults in them. If you don’t check it, you might end up working without any result!

Check the current and go through both the batteries and the smart light switches. Yes, these switches can make your home smart but before connecting, make sure you check them! Use a voltmeter for the job. Wire them up to any lamp and see if they are working or not.

Step 5: Understanding the Connections

Once both of the batteries and switches start working, you are ready for the next step. It’s time for you to position the LEDs. After placing them in the right place, you have to search for the examine them. And then, it’s your time to find the leads.

Search for the cathode or the negative lead. There can be one or more such leads. This one is usually short in length. If you are dealing with a round LED, this is the flattened part. Each of these lead will be added to a node which is of triangle shape. On the contrary, you have to search for the positive lead or the anode too! This is usually added to the larger node.

If you can light up the LED properly, there will be a diode test function meter that will light up the bulb. And if you see it lighting up, all you need to ensure is the black test lead should be added to the cathode. On the other hand, certify that the red test lead is added to the anode.

Step 6: Solder the Wires

So, you already know which lead is designed for what purpose. Now, you have to solder the wires to the battery. The cathode or the negative lead will go directly to the ground. You can solder it to the negative port of the battery here.

On the other side, the anode or the positive lead will be wired to the switch (on/off switch.) And eventually, it will be wired into the 13v battery’s positive port. Now, it is time to switch it on and see if the LED light is working or not. If everything goes right, check how to hide electrical cords on hardwood floors and conceal them.

And if you hate to do all these work, you can simply get LED strip lights for your house. The question is are LED strip lights safe for eyes? Know about it and then plan to install; these are easier!

Wrap Up

Connecting a LED light to a battery and switch to light it up is not very tough. All you need is a set of gears and learn the step-by-step process of installation. Go through the mentioned method and you won’t regret it!

But make sure you wear all your safety gear beforehand to avoid any accidents. Check the wires properly before connecting to ensure protection!